Overview

　　The SIVACON 8PT low-voltage switchgear is a new low-voltage switchgear designed by Siemens. It has circuit breaker technology, fixed-mount technology and drawer technology design. The SIVACIN 8PT produced by the company as a ”licensed production partner“ of Siemens is suitable for low-voltage distribution systems with AC 50Hz and rated working voltages of 690V and below. As a variety of power generation, transmission, distribution, power conversion and power consumption control equipment, can be widely used in industrial and mining enterprises, building hotels, municipal construction and other low-voltage power distribution systems.

　　The switchgear is fully compliant with the national standard GB725l and the international standard IEC60439-1.

 

　　Characteristics

　　The SIVACON 8PT drawer switchgear with motor circuit and cable feed circuit provides optimum safety and suitability for high operational convenience.

　　With the wizard's draw-out mechanism, it can be quickly and easily replaced and adjusted. Thus each module can be subjected to an addition or transformation, even if the compartment can be changed during operation.

　　Standard modules that pass the form test have a higher level of safety. The outlet circuit can be up to 250kW. It can be protected by a fuse or circuit breaker. The degree of protection for the test and separation positions is IP30. All extraction units have a standard operator interface. There is an isolation interval on the power supply side and the feed side. The draw-out unit saves space and the minimum unit height is l00mm. The cable connection compartment can be at the front or rear. It can be easily adjusted according to changing conditions, without the need to power off the entire cabinet.

　　The frame is made of 2.5mm high-quality steel plate with a hole with a modulus of 25mm on the frame, which can be expanded for various purposes. The cable can be connected above or below.

　　The enclosure protection class is IP30, IP3l, IP40, IP4l, IP42, IP54.

　　Light weight, high mechanical strength and assembly precision, and beautiful appearance.

　　High technical performance: The main parameters have reached the international advanced level.

 

　　Normal use environmental conditions

　　The ambient air temperature is not higher than +40 ° C, not lower than 5 ° C. And the average temperature within 24h is not higher than 35 ° C

　　Indoor installation and use, the altitude does not exceed 2000 meters.

　　Atmospheric conditions: Relative humidity does not exceed 50% at the highest temperature +40 ° C, and allows higher relative humidity at lower temperatures, such as 90% at +20 ° C, but may occur accidentally in consideration of temperature changes The effect of condensation.

　　The device is suitable for transport and storage at the following temperatures: between -25 ° C and 55 ° C, in a short time （not more than 24 h） up to +70 ° C, at these extreme temperatures, the device should not be subject to any Recovery damage, and should work properly under normal conditions.

　　The equipment is installed in a location free of explosion hazard, chemical corrosion and severe vibration.

　　Exceeding the above conditions of use, when the user has special requirements, it can be specially negotiated with the manufacturer.